Malaysia Steel Manufacturer   

Career With Us.

We are an established and well diversified Group of Companies listed on the Main Board of Bursa Malaysia. We are seeking suitable dedicated and highly motivated personnel to be part of our exciting team.

Attractive remuneration package will be offered to the right candidates.

ELECTRICAL ENGINEER

(SELANGOR –BUKIT RAJA, KLANG)


Job description:

  • In-charge of the electrical maintenance.
  • Responsible for the following plant’s activities:
    • Preventive Maintenance activities.
    • Daily machineries and equipment breakdown maintenance.
    • Project engineering support.
  • Make recommendation on the possibility of machineries and equipment modification and upgrading in order to prevent man-hour losses due to prolong and frequent Machineries and Equipment breakdown and hence assist to maximize production output.
  • Plan, implement, monitor and ensure that the Section Electrical Preventive Maintenance Program is carried out in accordance to the approved schedule.
  • Promote quality and safety awareness and responsibilities among members of the department.
  • Ensure that the Company Quality System Procedures and Work Instruction are implemented and maintained in accordance with ISO 9001.
  • Perform ad-hoc duties assigned by the Management from time to time.

Requirements:

  • Candidate must possess at least a Bachelor’s Degree, Post Graduate Diploma, Professional Degree, Electrical / Electronic, Mechanical Engineering or equivalent.
  • Minimum 2 years relevant working experience preferably in steel manufacturing industry.
  • Language proficiency: English, Bahasa Malaysia and Chinese.
  • Candidate must be able to read and write in Chinese.

MECHANICAL ENGINEER

(SELANGOR –BUKIT RAJA, KLANG)


Job description:

  • Preventive maintenance machine activities for CCM, WTP, Ladle & Slide gate.
  • Daily machineries and equipment breakdown maintenance.
  • Project engineering support.
  • Make recommendation on the possibility of machineries and equipment modification and upgrading order to prevent man-hour losses due to prolong and frequent Machineries and Equipment breakdown and hence assist maximize production output.
  • Plan, implement, monitor and ensure that the Mechanical Preventive Maintenance Program is carried in accordance to the approved schedule.
  • Promote quality and safety awareness and responsibilities among members of the department.
  • Ensure that the Company Quality Procedures and Work Instruction are implemented and maintained in accordance with ISO 9001.
  • Perform ad-hoc duties assigned by the Management from time to time.

Requirements:

  • Candidate must possess at least a Bachelor’s Degree, Post Graduate Diploma, Professional Degree, Electrical / Electronic, Mechanical Engineering or equivalent.
  • Minimum 2 years relevant working experience preferably in steel manufacturing industry.
  • Language proficiency: English, Bahasa Malaysia and Chinese.
  • Candidate must be able to read and write in Chinese.

QA ENGINEER

(SELANGOR –BUKIT RAJA, KLANG)


Job description:

  • In charge of chemical laboratory, incoming laboratory and online inspection section.
  • Supervising and manpower arrangement.
  • Ensure that the Company Quality Procedures and Work Instruction are implemented and maintained in accordance with ISO 9001.
  • Maintaining accuracy and consistency performance of equipment at laboratory.

Requirements:

  • Candidate must possess at least a Bachelor’s Degree, Post Graduate Diploma, Professional Degree, Electrical / Electronic, Mechanical Engineering or equivalent.
  • Minimum 2 years relevant working experience preferably in steel manufacturing industry.
  • Language proficiency: English, Bahasa Malaysia and Chinese.
  • Candidate must be able to read and write in Chinese.

PRODUCTION ENGINEER

(SELANGOR –BUKIT RAJA, KLANG)


Job description:

  • Organize and administrate production section activities which include direct standby technician.
  • Make in-depth study on problems related to steel making process and prepare solution based on process analysis.
  • Plan and prepare production preventive maintenance schedule.
  • Prepare breakdown report on daily, monthly and yearly basis.
  • Expedite repairs for breakdown.
  • Implement upgrading plan to improve plant productivity and product quality performance.
  • Summarizing information regarding urgent and outstanding work.
  • Supervise and manage new electrical installation.
  • Initiating request for electrical spare parts for plant continuous operation.
  • Initiate continuous improvement project for steel making plant.

Requirements:

  • Candidate must possess at least a Bachelor’s Degree, Post Graduate Diploma, Professional Degree, Electrical / Electronic, Mechanical Engineering or equivalent.
  • Minimum 2 years relevant working experience preferably in steel manufacturing industry.
  • Language proficiency: English, Bahasa Malaysia and Chinese.
  • Candidate must be able to read and write in Chinese.
  • High level of competency and motivation.
  • High level of safety consciousness.
  • Be on 24/7 days (including rest day and public holidays) on call for plant problems and emergency.

If your profile meets our requirements, please email your resume to hr@masteel.com.my

Please include your CURRENT SALARY & EXPECTED SALARY, NOTICE PERIOD and RECENT PHOTOGRAPH, in your resume.

ROLLERMAN

(SELANGOR – PETALING JAYA & BUKIT RAJA, KLANG)


Job description:

  • Set up the mill for every change of product size and roll change
    • Ensure that the groove profile is according to the pass design of particular size
    • Measure and record the roll diameter
    • Set up the roll according to pass line
    • Install and align the guides for every stand and adjust the twist angle
    • Set up roll gap according to pass schedule
    • Install cooling system on roll grooves and guides
  • Mill testing prior to rolling of first billet in every change size
    • Run through small billet and measure the stock profile
    • Adjust the gap accordingly until the required profile is achieved
  • Check the bar quality and weight after the first billet and adjust the mill accordingly
  • Coordinate with QC on monitoring bar weight and quality
  • Periodic lubrication of roll chocks and roller guides
  • Periodic inspection of roll and guiding system alignment
  • Monitor the roll pass and guide wear out
  • Assist in the repair of reheating furnace
  • Perform ad-hoc duties assigned by the immediate supervisor from time to time.

Requirements:

  • Possess at least a Professional certificate, Diploma, Bachelor’s Degree in Mechanical Engineering or equivalent.
  • Minimum 2 years relevant working experience preferably in a steel manufacturing industry.
  • Ability to work on rotational shifts.


QC INSPECTOR

(SELANGOR – PETALING JAYA & BUKIT RAJA, KLANG)


Job description:

  • Responsible for carrying out quality inspection activities on incoming, in-process and finished products to ensure conform to specifications.
  • Responsible to collect & record quality data in the inspection records and reports.
  • To make preparation for quality inspection and testing status reports.
  • To assist in control of non-conforming products or materials including proper identification and segregation.
  • Responsible for advising the Supervisor the non-conformist detected during inspection and recommend appropriate corrective and preventive action to be taken.
  • To keep track on the rejected and reworked products.
  • To comply with the Company occupational safety, health and environment rules and regulations.
  • To carry out other duties and responsibilities as assigned by Superiors from time to time.

Requirements:

  • Certificate / Diploma or SPM passed with a minimum of 2 years relevant working experience preferably in a steel manufacturing industry.
  • Ability to work on rotational shifts.


ELECTRICAL TECHNICIAN

(SELANGOR –PETALING JAYA)


Job description:

  • Assemble, install, test and maintain electrical wirings and electronic equipment.
  • Maintenance of LV, HV switch gears, AC and DC motor servicing.
  • Maintenance of DC and AC drives.
  • Maintenance of overhead crane and water pump controls.
  • Inspect electrical systems, equipment and component to identify hazards, defect and the need to adjustment or repair and to insure compliance workshop / electrical aides.
  • Perform ad-hoc duties assigned by the immediate supervisor from time to time.

Requirements:

  • Possess at least a Diploma, Short Course Certificate in Electrical or equivalent.
  • Minimum 2 years relevant working experience preferably in a steel manufacturing industry.
  • Ability to work on rotational shifts.

MOTOR REWINDER

(SELANGOR –PETALING JAYA)


Job description:

  • Rewind the burned coils of DC motor and AC motor.
  • Servicing and repairing of DC and AC motors including bearing replacement and greasing.
  • Repair and align motor cores Lamination.
  • Trouble shooting of motor controls.
  • Perform ad-hoc duties assigned by the immediate supervisor from time to time.

Requirements:

  • Possess at least a Diploma, Short Course Certificate in Electrical or equivalent.
  • Minimum 2 years relevant working experience preferably in a steel manufacturing industry.
  • Ability to work on rotational shifts.


ROLL AND GUIDE MECHANIC

(SELANGOR –PETALING JAYA)


Job description:

  • Servicing of Roll chock bearing and housing assembly
    • Press out roll coupling and bearing chock assembly
    • Cleaning of bearing housing parts
    • Check and replace worn out parts
    • Pump in grease into the bearing chock after assembly
  • Servicing of guides
    • Clean and dismantle guides
    • Clean all components and replace worn out parts
    • Assemble align and adjust bearing clearance
    • Apply lubricants to moving parts
  • Lubrication of bearing housing and guides in the Roughing mill area
  • Carry out fabrication jobs such as static guides billet runways, etc
  • Assist Rollerman in change size or change roll
  • Assist in the repair or maintenance of reheating furnace
  • Perform ad-hoc duties assigned by the immediate supervisor from time to time.

Requirements:

  • Possess at least a Diploma, Short Course Certificate in Mechanical or equivalent.
  • Minimum 2 years relevant working experience preferably in a steel manufacturing industry.
  • Ability to work on rotational shifts.


GENERAL WORKER

(SELANGOR –PETALING JAYA & BUKIT RAJA, KLANG)


Job description:

  • Cutting of cobbles
  • Remove scales from scale pits
  • Operate the cold shear
  • Counting of bars
  • Sort out short lengths from standard lengths bars
  • Bundling of bars according to the required number of pieces
  • Assist in roll change and change size
  • Stacking of bars
  • Loading of bars for delivery
  • Off loading of billets
  • Charging of billet into the furnace
  • Recording of billet heat number
  • Assist in repair or maintenance of furnace
  • General housekeeping
  • Perform ad-hoc duties assigned by the immediate supervisor from time to time.

Requirements:

  • Minimum 1 year relevant working experience preferably in a steel manufacturing industry.
  • Ability to work on rotational shifts.

If your profile meets our requirements, please email your resume to hr@masteel.com.my

Please include your CURRENT SALARY & EXPECTED SALARY, NOTICE PERIOD and RECENT PHOTOGRAPH, in your resume.


MALAYSIA STEEL WORKS (KL) BHD
Wisma Masteel
No. 29C Off Jalan Tandang,
Section 51, 46050 Petaling Jaya,
Selangor Darul Ehsan
Email : // hr@masteel.com.my